Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the brake caliper pins and brake pad springs for damage or excessive corrosion and replace, if necessary. Rear Disc Brake Mounting and Hardware Inspection
- Disc Brake Pad Spring - Install
- Brake Pad Guide Pin <p01><p01> - Install
- Ensure the brake pad guide pins are fully seated in the brake caliper.
- Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later) - Install