Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front brake shield (1).
- Install the front brake shield bolts (1) and tighten to 9 N.m (80 lb in).
- Install the front brake rotor. Refer to Front Brake Rotor Replacement (JE5) Front Brake Rotor Replacement (J55) .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later) .
CAUTION:
Refer to Fastener Caution .