Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Brake Hose - Install
- Brake Hose Fitting Gasket @ Rear Brake Hose - Install
- Brake Hose Fitting Bolt - Install 52 N.m (38 lb ft)
- Brake Hose Retainer - Install
- Brake Pipe Fitting - Install 18 N.m (13 lb ft)
- Bleed the brake system. Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding (Pressure)
- Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later) - Install
CAUTION:
Refer to Fastener Caution .