Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Power Brake Booster Pump Insulator - Install
- Power Brake Booster Pump Spacer - Install
- Power Brake Booster Pump Bracket - Install
- Power Brake Booster PumpBolt - Install
- Power Brake Booster Pump Nut- Install
- Power Brake Booster Pump Bolt - Tighten 22 N.m (16 lb ft)
- Power Brake Booster Pump - Install
- Power Brake Booster Pump M12 Bolt - Install
- Power Brake Booster Pump M6 Bolt - Install
- Power Brake Booster Pump M6 Bolt - Tighten 10 (89 lb in)
- Power Brake Booster Pump M12 Bolt - Tighten 70 (52 lb ft)
- Power Brake Booster Vacuum Hose Quick Connect @ Vacuum Pump - Connect
- Vacuum Hose@ Engine Mount - Connect
- Connect the power brake booster pump electrical connector.
- Air Cleaner Outlet Front Duct Replacement (LF4) - Install
- Intake Manifold Cover Replacement (LF4)Intake Manifold Cover Replacement (LGX) - Install
CAUTION:
Refer to Fastener Caution .
NOTE:
Do not tighten the bolt until instructed.
NOTE:
Do not tighten the bolt until instructed.