Manifold Absolute Pressure Sensor Replacement

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manifold Absolute Pressure Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Manifold Absolute Pressure Sensor Retaining Fastener CAUTION: Refer to Fastener Caution . Tighten 10 (89 lb in)
2	Manifold Absolute Pressure Sensor Procedure Disconnect the engine wiring harness electrical connector from the manifold absolute pressure sensor. Remove the manifold absolute pressure sensor from the intake manifold. Install a NEW seal if reusing the manifold absolute pressure sensor.

Callout

Component Name

Manifold Absolute Pressure Sensor Retaining Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
10 (89 lb in)

Manifold Absolute Pressure Sensor

Procedure

Disconnect the engine wiring harness electrical connector from the manifold absolute pressure sensor.
Remove the manifold absolute pressure sensor from the intake manifold.
Install a NEW seal if reusing the manifold absolute pressure sensor.