Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Oil Cooler Pipe - Install
- Engine Oil Cooler Pipe Retainer - Install
- Engine Oil Cooler Pipe Retainer Clip - Install
- Engine Oil Cooler Pipe Fastener - Install and tighten 10 N.m (89 lb in)
- Engine Oil Cooler Pipe Retainer - Install
- Air Cleaner Assembly Replacement (LGX) Install
- Air Cleaner Outlet Duct Replacement (LGX) Install
- Install a NEW oil filter. Engine Oil and Oil Filter Replacement (LGX, RWD)Engine Oil and Oil Filter Replacement (LGX, AWD)
- Check and correct the engine oil level. Approximate Fluid Capacities (LGX) , and Adhesives, Fluids, Lubricants, and Sealers (LGX)
CAUTION:
Refer to Fastener Caution .