LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Cooling System) >> Repair Instructions >> Engine Oil Cooler Pipe Replacement (LGX, Inlet) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Oil Cooler Pipe
    GM4178821Courtesy of GENERAL MOTORS COMPANY
  1. Engine Oil Cooler Pipe - Install
  2. Engine Oil Cooler Pipe Retainer - Install
    3. Fig 2: Engine Oil Cooler Pipe
    GM4178814Courtesy of GENERAL MOTORS COMPANY
  3. Engine Oil Cooler Pipe - Connect
  4. Engine Oil Cooler Pipe Retainer - Install
    5. Fig 3: Retaining Clip
    GM4427648Courtesy of GENERAL MOTORS COMPANY
  5. Install the retaining clip (1) to the engine oil cooler pipes.
  6. Air Cleaner Assembly Replacement (LGX) Install
  7. Air Cleaner Outlet Duct Replacement (LGX) Install
  8. Install a NEW oil filter. Engine Oil and Oil Filter Replacement (LGX, RWD)Engine Oil and Oil Filter Replacement (LGX, AWD)
  9. Check and correct the engine oil level. Approximate Fluid Capacities (LGX) , and Adhesives, Fluids, Lubricants, and Sealers (LGX)
scientia non olet · About LEMON Manuals