Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Oil Cooler Fitting - Install and tighten 34 N.m (25 lb ft)
- Engine Oil Cooler Inlet Pipe - Install
- Engine Oil Cooler Inlet Pipe Retainer - Install
- Oil Level Indicator Tube Install - Oil Level Indicator Tube Replacement (LGX)
- Air Cleaner Assembly Install - Air Cleaner Assembly Replacement (LGX)
- Fill the cooling system. Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716)
CAUTION:
Refer to Component Fastener Tightening Caution .
NOTE:
Install a NEW engine oil cooler fitting.