Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement (LF4)
- Fuel Pipe Shield - Remove - Fuel Pipe Shield Replacement (LF4)
- Hood Strut-Right Side - Remove - Hood Strut ReplacementHood Strut Replacement (ATS-V)
- Heater Inlet Hose @ Engine Coolant Thermostat Housing Disconnect - Heater Inlet Hose Replacement (LF4)
- Heater Outlet Hose @ Engine Coolant Thermostat Housing Disconnect - Heater Outlet Hose Replacement (LF4)
- Engine Coolant Temperature Sensor Electrical Connector - Disconnect
- Disconnect the engine electrical wiring harness (2) from the back of the engine and relocate to improve access.
- Evaporative Emission Canister Purge Tube @ Evaporative Emission Canister Purge Pipe Disconnect and position aside- Evaporative Emission Canister Purge Tube Replacement (LF4)
- Fuel Feed Pipe @ Engine Disconnect - Fuel Feed Pipe Replacement (LF4 at Engine)
- Radiator Outlet Pipe - Remove - Radiator Outlet Pipe Replacement (LF4)
- Engine Coolant Thermostat Housing Bolt - Remove
- Engine Coolant Thermostat Housing - Remove
- Engine Coolant Thermostat Housing Gasket - Remove and DISCARD