Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series)
- Front Bumper Fascia Air Deflector - Remove - Front Air Deflector Replacement
- Drain the coolant. Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716)
- Engine Coolant Fan Shroud Bolt - Remove
- Transmission Fluid Cooler Pipe @ Engine Coolant Fan Shroud - Unclip
- Remove the supports and lower the vehicle.
- Front Compartment Front Sight Shield - Remove - Front Compartment Front Sight Shield Replacement (Sedan)Front Compartment Front Sight Shield Replacement (Coupe)Front Compartment Front Sight Shield Replacement (ATS-V)
- Air Cleaner Outlet Duct - Remove - Air Cleaner Outlet Duct Replacement (LTG)
- Air Cleaner Assembly - Remove - Air Cleaner Assembly Replacement (LTG)
- Disconnect the electrical connector.
- Push Pin @ Engine Coolant Fan Shroud - Remove
- Engine Mount Vacuum Filter @ Engine Coolant Fan Shroud Unclip - Engine Mount Vacuum Filter Replacement
- Engine Coolant Fan Shroud Bolt - Remove
- Transmission Fluid Cooler Pipe @ Engine Coolant Fan Shroud Unclip
- Transmission Fluid Cooler Pipe @ Radiator Assembly Remove - Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With RWD, With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With AWD, With V03)
- Radiator Outlet Hose @ Radiator Assembly Remove - Radiator Outlet Hose Replacement (LTG with V03)
- Radiator Inlet Hose @ Radiator Assembly Remove - Radiator Inlet Hose Replacement (LTG)
- Engine Coolant Fan Shroud @ Radiator Assembly Remove