LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Exhaust System) >> Repair Instructions >> Turbocharger Heat Shield Replacement (LF4 Bank 1) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Turbocharger Heat Shield
    GM4230487Courtesy of GENERAL MOTORS COMPANY
  1. Turbocharger Heat Shield - Install
    2. Fig 2: Turbocharger Oil Feed Pipe Hollow Screw
    GM4230486Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Install NEW copper gaskets.

  2. Turbocharger Oil Feed Pipe Hollow Screw - Install and tighten 35 N.m (26 lb ft)
    3. Fig 3: Turbocharger Heat Shield Fasteners
    GM4230484Courtesy of GENERAL MOTORS COMPANY
  3. Turbocharger Heat Shield Fastener - Install and tighten 10 N.m (89 lb in)
  4. Radiator Surge Tank Replacement (LF4 LGX) - Install
scientia non olet · About LEMON Manuals