Rear Body Exhaust Heat Shield Replacement (LCV, LTG, LF4)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Rear Muffler Heat Shield (LCV, LTG, LF4)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Rear Bumper Fascia@Exhaust Rear Muffler Heat Shield - Disconnect - Rear Bumper Fascia Replacement Exhaust Muffler Replacement (LCV) Exhaust Muffler Replacement (LF4) Exhaust Muffler Replacement (LTG)
1	Rear Body Exhaust Heat Shield Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Rear Body Exhaust Heat Shield Fastener Tighten 1.75 N.m (15 lb in)
3	Rear Body Exhaust Heat Shield