LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Exhaust System) >> Repair Instructions >> Intermediate Body Exhaust Heat Shield Replacement (V-Series)

Intermediate Body Exhaust Heat Shield Replacement (V-Series)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intermediate Body Exhaust Heat Shield
GM2807242Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to Exhaust Service Warning .

WARNING:

Refer to Eye Protection Warning .

Preliminary Procedures

  1. Remove the right side underbody front air deflector. Underbody Front Air Deflector Replacement - Right Side .
  2. Remove the left side underbody front air deflector. Underbody Front Air Deflector Replacement - Left Side .
  3. Lower the muffler. Exhaust Muffler Replacement (LCV) Exhaust Muffler Replacement (LF4) Exhaust Muffler Replacement (LTG) , or Exhaust System Replacement (LGX) .
  4. Remove the transmission fluid cooler inlet and outlet pipes from the intermediate heat shield. Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LCV Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With AWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With RWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LCV With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With RWD, With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LTG With AWD, With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LF4 With MG9)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LF4 With M5U)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With AWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, With V03) .
1 Intermediate Body Exhaust Heat Shield Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Intermediate Body Exhaust Heat Shield