Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Exhaust Rear Muffler Insulator - Install
- Exhaust Rear Muffler Rear Hanger Fastener - Install and tighten 40 N.m (30 lb ft)
- Rear Bumper Fascia Replacement - Install
- Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series) - Install
CAUTION:
Refer to Fastener Caution .