Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Exhaust Muffler Assembly - Install
- Exhaust Muffler Isolator - Install
- Support the exhaust system.
- Exhaust Gasket - Install
- Exhaust Muffler Assembly Install
- Catalytic Converter Nut - Install and tighten 50 N.m (37 lb ft)
- Floor Panel Number 4 Bar - Install
- Floor Panel Number 4 Bar Fastener - Install and tighten 22 N.m (16 lb ft)
- Exhaust Rear Muffler Rear Hanger Replacement (Steel Design) Exhaust Rear Muffler Rear Hanger Replacement (Aluminum Design) - Install
NOTE:
Clean and lubricate the exhaust isolators for ease of installation.
NOTE:
Install a NEW gasket.
CAUTION:
Refer to Fastener Caution .