Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

With the aid of an assistant, install the exhaust system to the vehicle.

Fig 1: Exhaust Muffler Isolator

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Clean and lubricate the exhaust isolators for ease of installation.

Exhaust Muffler Isolator - Connect

Fig 2: Exhaust MufflerAnd Catalytic Converter

Courtesy of GENERAL MOTORS COMPANY

Install a NEW gasket.
Exhaust Muffler @Catalytic Converter - Connect

CAUTION:

Refer to Fastener Caution .

Catalytic Converter Nut - Tighten 50 N.m (37 lb ft)

Fig 3: Exhaust Pipe Clamp Nuts

Courtesy of GENERAL MOTORS COMPANY

Exhaust Pipe Clamp - Install
Exhaust Muffler @Catalytic Converter - Connect
Exhaust Pipe Clamp Nut - Tighten 50 N.m (37 lb ft)
Exhaust Rear Muffler Rear Hanger Replacement (Steel Design) Exhaust Rear Muffler Rear Hanger Replacement (Aluminum Design) - Install