Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission Fluid Cooler Pipe(Mid Line Right) - Install
- Transmission Fluid Cooler Pipe Fitting Retainer at Transmission Fluid Cooler Pipe (Rear Differential Outlet Hose) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Cooler Pipe (Mid Line Right) at Transmission Fluid Cooler Pipe (Rear Differential Outlet Hose) - Install
- Transmission Fluid Cooler Pipe Fitting Retainer at Transmission Fluid Cooler Pipe (Mid Line Right) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Cooler Pipe (Mid Line Right) at Transmission Fluid Cooler Inlet and Outlet Pipe - Install
- Install the right side underbody front air deflector bolt (1) and tighten to 9 N.m (80 lb in).
- Install the transmission fluid cooler pipe clips (2) into the right side underbody front air deflector.
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level Inspection (MG9)
- Inspect for transmission fluid leaks.
CAUTION:
Refer to Fastener Caution .