Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission Fluid Cooler Pipe (Rear Differential Inlet Hose) - Install
- Transmission Fluid Cooler Pipe Fitting Retainer at Transmission Fluid Cooler Pipe (Rear Differential Inlet Hose) - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Cooler Pipe (Rear Differential Inlet Hose) at Transmission Fluid Cooler Pip e(Mid Line Left) - Install
- Transmission Fluid Cooler Pipe Fitting Retainer at Rear Axle - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Cooler Pipe (Rear Differential Inlet Hose) at Rear Axle - Install
- Install the rear differential hoses in the transmission fluid cooler pipe bracket and tighten the bolt (2) to 9 N.m (80 lb in).
- Attach the transmission fluid cooler pipe tie strap (1) to the rear differential outlet hose.
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level and Condition Check
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level Inspection (MG9)
- Inspect for transmission fluid leaks.
CAUTION:
Refer to Fastener Caution .