Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the transmission fluid auxiliary cooler (1) on the vehicle.
- Clip the transmission fluid auxiliary cooler (1) in the engine oil cooler bracket.
- Transmission Fluid Auxiliary Cooler Bracket Bolt - Install and tighten 9 N.m (80 lb in)
- Front Bumper Fascia Center Support Replacement - Install
- Transmission Fluid Auxiliary Cooler Outlet Pipe Replacement (LGX With RWD, With V03) - Install
- Transmission Fluid Auxiliary Cooler Inlet Pipe Replacement (LGX With RWD, With V03) - Install
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Fill Procedure
- Inspect for transmission fluid leaks.