Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the transmission fluid auxiliary cooler inlet pipe (1) on the vehicle.
- Transmission Fluid Cooler Pipe Fitting Retainer at Radiator - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Auxiliary Cooler Inlet Pipe at Radiator - Install
- Transmission Fluid Cooler Pipe Fitting Retainer at Air Conditioning Condenser - Install - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Transmission Fluid Auxiliary Cooler Inlet Pipe at Air Conditioning Condenser - Install
- Radiator Upper Bracket Replacement (LTG, LGX) - Install -Left Side
- Front Compartment Front Sight Shield Replacement (Sedan)Front Compartment Front Sight Shield Replacement (Coupe)Front Compartment Front Sight Shield Replacement (ATS-V) - Install
- Air Cleaner Assembly Replacement (LGX) - Install
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks.