Throttle Body Assembly Replacement (LGX)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Throttle Body Assembly (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Air Cleaner Outlet Duct Replacement (LGX)
1	Throttle Body Assembly Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Throttle Body NOTE: Clean any debris prior to removing the throttle body. Cover any openings to prevent debris from entering into the intake manifold. Procedure Disconnect the electrical connector. After replacement is complete, perform the throttle learn procedure. Q38 Throttle Body: Throttle/Idle Learn
3	Throttle Body Gasket NOTE: Install a NEW throttle body gasket when installing the throttle body.