Manifold Absolute Pressure Sensor Replacement (Intake Manifold LF4)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manifold Absolute Pressure Sensor (Intake Manifold LF4)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Intake Manifold Cover Replacement (LF4) Plenum Front Panel Replacement
1	Manifold Absolute Pressure Sensor Electrical Connector
2	Manifold Absolute Pressure Sensor Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
3	Manifold Absolute Pressure Sensor Procedure Replace the O-ring seal.