Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve the fuel system pressure. Fuel Pressure Relief
- Engine Rear Noise Shield Replacement (LF4) -Remove
- Disconnect the Fuel Feed Pipe - Fuel Tank to Engine from the Fuel Feed Pipe - at Engine. Fuel Feed Pipe Replacement (Fuel Tank To Engine LF4) Fuel Feed Pipe Replacement (LF4 at Engine)
- Electrical Connector 1 @ Fuel Feed Pipe Bracket 2 -Unclip
- Fuel Feed Pipe Bolt -Remove
- Fuel Feed Pipe Fitting -Loosen
- Fuel Feed Pipe -Remove and DISCARD