Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the evaporative emission canister purge tube. Evaporative Emission Canister Purge Tube Replacement (LGX)
- Remove the evaporative emission hose (1) from the retainers (2).
- Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series)
- Remove the underbody front air deflector right side. Underbody Front Air Deflector Replacement - Right Side
- Remove the front body exhaust heat shield right side. Front Body Exhaust Heat Shield Replacement (Right)Front Body Exhaust Heat Shield Replacement (Left)
- Remove the right side catalytic converter and exhaust. Exhaust System Replacement (LGX)
- Disconnect the evaporative emission hose (1) and remove from retainers (2). Plastic Collar Quick Connect Fitting Service
- Remove the evaporative emission hose (1) from the vehicle.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .