Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Intake Manifold Cover Replacement (LF4) - Remove
- Evaporative Emission Canister Purge Tube Replacement (LF4) - Remove
- Front End Sheet Metal Diagonal Brace Replacement - Right Side (ATS-V)Front End Sheet Metal Diagonal Brace Replacement - Right Side - Remove
- Heater Inlet Hose Replacement (LF4) - Remove
- Heater Outlet Hose Replacement (LF4) - Remove
- Evaporative Emission Pipe @ Retainer - Remove
- Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series)
- Underbody Front Air Deflector Replacement - Right Side - Remove
- Remove the front body exhaust heat shield right side. Front Body Exhaust Heat Shield Replacement (Right)Front Body Exhaust Heat Shield Replacement (Left)
- Remove the right side catalytic converter and exhaust. Exhaust System Replacement (LGX)
- Heat Sleeve - Remove
- Evaporative Emission Pipe @ Retainer - Remove
- Evaporative Emission Pipe @ Fuel Tank Vent Valve Hose - Disconnect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Pipe @ Retainer - Remove
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .