Front Wheelhouse Splash Shield Replacement (RWD)
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series October 4th 2015 and Earlier)Tire and Wheel Removal and Installation (V-Series October 5th 2015 and Later) . |
|
| 1 | Front Wheelhouse Splash Shield Push-In Retainer (Qty: 2) |
| 2 | Front Wheelhouse Splash Shield Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in) |
| 3 | Front Wheelhouse Splash Shield |