Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Front Crossmember Brace - install
- Front Crossmember Brace Bolt - Install and tighten 22 N.m (16 lb ft)
- Radiator Outlet Hose - install Radiator Outlet Hose Replacement (LF4)
- Drivetrain and Front Suspension Cradle Front Bolt - install and tighten 100 N.m (74 lb ft)
- Drivetrain and Front Suspension Cradle Bolt - Tighten 100 N.m (74 lb ft)
- Front Cradle Shear Plate - install Front Cradle Shear Plate Replacement (V Series)
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution