Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Crossmember Brace

Courtesy of GENERAL MOTORS COMPANY

Front Crossmember Brace - install

CAUTION:

Refer to Fastener Caution

Front Crossmember Brace Bolt - Install and tighten 22 (16 lb ft)

Fig 2: Radiator Outlet Hose And Clamp

Courtesy of GENERAL MOTORS COMPANY

Radiator Outlet Hose - install Radiator Outlet Hose Replacement (LF4)

Fig 3: Air Cleaner Assembly

Courtesy of GENERAL MOTORS COMPANY

Air Cleaner Assembly - install Air Cleaner Assembly Replacement (LF4)

Fig 4: Drivetrain and Front Suspension Cradle Bolts

Courtesy of GENERAL MOTORS COMPANY

Drivetrain and Front Suspension Cradle Front Bolt (1) - install and tighten 100 N.m (74 lb ft)
Drivetrain and Front Suspension Cradle Bolt (2) - Tighten 105 N.m (77 lb ft)

Fig 5: Front Cradle Shear Plate

Courtesy of GENERAL MOTORS COMPANY

Front Cradle Shear Plate - install Front Cradle Shear Plate Replacement (V Series)
Lower the vehicle.