Front Compartment Lower Noise Shield Replacement (AWD)
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series) . |
|
| 1 | Front Compartment Lower Noise Shield Push-In Retainer (Qty: 6) |
| 2 | Front Compartment Lower Noise Shield Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution . |
| 3 | Front Compartment Lower Noise Shield Bolt (Qty: 11) Tighten 5 N.m (44 lb in) |
| 4 | Front Compartment Lower Noise Shield |