Engine Oil Cooler Pipes and Fittings Installation
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Engine Oil Cooler Pipes and Fittings Installation
| Callout | Component Name |
|---|---|
| 1 | Engine Oil Cooler Fitting
CAUTION:
Refer to Fastener Caution .
CAUTION:
When installing the fitting, first remove the oil filter. When torquing the fitting, use a standard or thin wall socket (not an impact socket) in order to prevent the wall of the socket from contacting the oil pan. Contact between the socket and filter or pan would reduce the torque applied to fitting, potentially resulting in a loose fitting. Tighten 25 N.m (18 lb ft) |
| 2 | Engine Oil Cooler Fitting Tighten 25 N.m (18 lb ft) |
| 3 | Engine Oil Cooler Inlet Pipe |
| 4 | Engine Oil Cooler Pipe |
| 5 | Engine Oil Cooler Pipe |