LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical - 3.6L (LGX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Carrier Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove any old thread sealant, gasket material or RTV sealant using EN-28410  remover.
  2. Clean the camshaft carriers using a non corrosive solvent.
  3. Clean out debris from the bolt holes.
    4. WARNING:

    Refer to Safety Glasses Warning .

  4. Dry the camshaft carriers with compressed air.
scientia non olet · About LEMON Manuals