LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Engine Mechanical - 3.6L (LGX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Level Indicator Tube Bracket Bolt
    GM4298078Courtesy of GENERAL MOTORS COMPANY
  1. Remove Oil Level Indicator Tube Bracket Bolt (1)
  2. Detach wiring harness retainers as necessary.
    3. Fig 2: Oil Level Indicator Tube
    GM4298084Courtesy of GENERAL MOTORS COMPANY
  3. Remove Oil Level Indicator Tube (1)
    4. Fig 3: Identifying Oil Level Indicator Tube & O-Ring
    GM1958778Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The oil level indicator tube seal is a single use item.

  4. Remove the O-ring (1) from the oil level indicator tube (2) and DISCARD.
scientia non olet · About LEMON Manuals