LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Engine Mechanical - 3.6L (LGX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Air Cleaner Outlet Duct - Air Cleaner Outlet Duct Replacement
  2. Remove Manifold Absolute Pressure Sensor - Manifold Absolute Pressure Sensor Replacement
    3. Fig 1: Vacuum Hose And Harness Connector
    GM4288978Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect Harness Connector (1)
  4. Detach the wire harness from the intake manifold cover as necessary.
  5. Disconnect Vacuum Hose (2) - Plastic Collar Quick Connect Fitting Service
    6. Fig 2: Vacuum Hose
    GM4289486Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect Vacuum Hose (1) @Intake Manifold Cover
    7. Fig 3: Intake Manifold Cover And Fastener
    GM4289145Courtesy of GENERAL MOTORS COMPANY
  7. Remove Intake Manifold Cover Fastener (1)
  8. Remove Intake Manifold Cover (2)
scientia non olet · About LEMON Manuals