LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Engine Mechanical - 3.6L (LGX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Crankshaft Front Oil Seal And Installer
    GM2716895Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

  1. Use the EN-29184  installer (1) or equivalent to install the crankshaft front oil seal (2).
  2. Install Crankshaft Balancer. Crankshaft Balancer Replacement 
scientia non olet · About LEMON Manuals