Camshaft Housing Cover Insulator Replacement - Right Side

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Housing Cover Insulator - Right Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect electrical connectors and remove the engine harness from the camshaft housing cover insulator. Disconnect Positive Crankcase Ventilation Tube@Camshaft Cover - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to Camshaft Covers) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to PCV Oil Separator)
1	Camshaft Housing Cover Insulator WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

Callout

Component Name

Preliminary Procedures

Disconnect electrical connectors and remove the engine harness from the camshaft housing cover insulator.
Disconnect Positive Crankcase Ventilation Tube@Camshaft Cover - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to Camshaft Covers) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Air Outlet Duct to PCV Oil Separator)

Camshaft Housing Cover Insulator

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.