Automatic Transmission Flex Plate Replacement
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Transmission Replacement (All Wheel Drive)Transmission Replacement (Front Wheel Drive) Special Tools
Equivalent regional tools:Special Tools . |
|
| 1 | Automatic Transmission Flex Plate Bolt (Qty:8)
CAUTION:
Refer to Fastener Caution .
CAUTION:
This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component.
NOTE:
NEW bolts must be used whenever removing the automatic transmission flex plate. Procedure Tighten 30 N.m (22 lb ft) plus 45 degrees |
| 2 | Automatic Transmission Flex Plate Procedure Automatic Transmission Flex Plate Cleaning and Inspection . |