Rear Bumper Lower Fascia Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Bumper Lower Fascia

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Rear Bumper Fascia Replacement
1	Rear Bumper Fascia Lower Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Bumper Lower Fascia Procedure Reposition the wiring harness. Using a flat-bladed tool, depress the tabs and pull on the fascia at the same time to gradually remove the upper fascia from the lower fascia. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Rear Bumper Fascia Replacement

Rear Bumper Fascia Lower Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Rear Bumper Lower Fascia

Procedure

Reposition the wiring harness.
Using a flat-bladed tool, depress the tabs and pull on the fascia at the same time to gradually remove the upper fascia from the lower fascia.
Transfer components as necessary.