Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install the left transmission mount (5) to the vehicle.
- Install the transmission mount to body bolts (4) and tighten to 58 N.m (43 lb ft).
- Install the NEW left transmission mount to transmission bolts (3) and tighten to 50 N.m (37 lb ft) plus 90 - 105 degrees.
- Position the transmission mount bracket (2) to the vehicle.
- Install the transmission mount bracket bolts (1) and tighten to 22 N.m (16 lb ft).
- Remove the transmission jack.
- Install the battery tray. Refer to Battery Tray Replacement
CAUTION:
Refer to Fastener Caution .