LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Automatic Transmission - 6T70 (M7U M7W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Bracket Replacement - Rear (Front Wheel Drive) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission mount bracket (2) to the transmission.
  2. Fig 1: Transmission Mount Bracket And Bolts
    GM4289994Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the three NEW transmission mount bracket to transmission bolts (1) and tighten to 100 N.m (74 lb ft) plus 40 to 60 degrees.
  4. Install the transmission rear mount. Refer to Transmission Rear Mount Replacement (Front Wheel Drive)