LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Automatic Transmission - 6T70 (M7U M7W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transaxle Mount And Attachment Bolts
    GM2199370Courtesy of GENERAL MOTORS COMPANY
  1. Install the transmission mount (1).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission mount bolts (2) and tighten to 58 N.m (43 lb ft).
    3. Fig 2: Front Transmission Mount Through Bolt
    GM2199369Courtesy of GENERAL MOTORS COMPANY
  3. Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).
  4. Remove the jack from the transmission.
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals