Transmission Control Lever Boot Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Control Lever Knob Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Transmission Control Lever Knob Retaining Tabs (Qty: 6) Procedure Using a flat-bladed plastic trim tool, release the retainer securing the control lever boot.
2	Electrical Dock & Lock Connector NOTE: Do Not twist the transmission control lever knob. Procedure Lift the transmission control lever knob straight up to disconnect the electrical connector.
3	Transmission Control Lever Knob NOTE: The control lever boot and knob are replaced as an assembly. DO NOT TWIST the knob to remove, pull upward ONLY.