LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Automatic Transmission - 6T70 (M7U M7W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. Remove the battery tray. Refer to Battery Tray Replacement
    3. Fig 1: Transmission Range Selector Lever Cable
    GM4363825Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin.
  4. Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket.
  5. Remove the left front floor console extension panel. Refer to Front Floor Console Extension Panel Replacement - Left Side
    6. Fig 2: Transmission Range Selector Lever Cable Terminal And Retainer
    GM4364012Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
  7. Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control lever base.
    8. Fig 3: Gear Shift Cable Grommet And Fasteners
    GM4364081Courtesy of GENERAL MOTORS COMPANY
  8. Move the floor carpet in order to gain access to the gear shift cable grommet (2).
  9. Remove the grommet fasteners (1) and the transmission range selector lever cable grommet from the cowl panel.
  10. Remove the transmission range selector lever cable from the vehicle.
scientia non olet · About LEMON Manuals