Manual Shift Shaft and Seal Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manual Shift Shaft And Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the battery tray. Refer to Battery Tray Replacement . Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
1	Manual Shift Shaft Seal For seal removal use DT-45201 Manual Shaft Seal Remover. For seal installation use DT-46626 Manual Shift Shaft Seal Installer. Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal. Special Tools DT-45201 Manual Shaft Seal Remover DT-46626 Manual Shift Shaft Seal Installer

Callout

Component Name

Preliminary Procedures

Remove the battery tray. Refer to Battery Tray Replacement .
Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .

Manual Shift Shaft Seal

For seal removal use DT-45201 Manual Shaft Seal Remover.
For seal installation use DT-46626 Manual Shift Shaft Seal Installer.
Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal.

Special Tools

DT-45201 Manual Shaft Seal Remover
DT-46626 Manual Shift Shaft Seal Installer