Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install the control valve body cover to the transmission. Refer to Control Valve Body Assembly Installation
- Connect the transmission fluid cooler inlet pipe (1) to the transmission. Refer to Transmission Fluid Cooler Inlet Pipe Replacement (M7U, M7W without V08)Transmission Fluid Cooler Inlet Pipe Replacement (M7U, M7W with V08)
- Connect the transmission fluid cooler outlet pipe (2) to the transmission. Refer to Transmission Fluid Cooler Outlet Pipe Replacement (M7U, M7W without V08)Transmission Fluid Cooler Outlet Pipe Replacement (M7U, M7W with V08)
- Connect the electrical connector to the transmission control valve body cover.
- Clip the transmission wiring harness to the transmission control valve body cover.
- Replace the transmission fluid drained from the transmission. Refer to Transmission Fluid Drain and Fill