LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 409 (Frame And Underbody) >> Repair Instructions >> Rear Suspension Cradle Insulator Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Rear Suspension Cradle (1) Rear Suspension Cradle Replacement (FWD) 
    2. Fig 1: Rear Suspension Cradle Insulator And Special Tool
    GM4373721Courtesy of GENERAL MOTORS COMPANY
  2. Install the CH-48509  Cradle Bushing Receiver Cup and the CH-45725-1  Puck as shown.
  3. Tighten the nut so the puck (2) pushes the rear suspension cradle insulator into the cradle bushing receiving cup (1).
scientia non olet · About LEMON Manuals