Front Cradle Brace Replacement
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle |
|
| 1 | Front Cradle Brace Bolt (Qty: 2)
CAUTION:
This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component.
NOTE:
Remove and DISCARD the bolts. Tighten First Pass: 58 N.m (43 lb ft) Final Pass: 25-40 degrees |
| 2 | Front Cradle Brace |