LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Rear Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
  2. Remove Rear Wheel Bearing and Hub Assembly.Rear Wheel Bearing and Hub Replacement (AWD) Rear Wheel Bearing and Hub Replacement (FWD) 
    3. Fig 1: Wheel Bearing And Hub Assembly
    GM4212755Courtesy of GENERAL MOTORS COMPANY
  3. Position the wheel bearing and hub assembly in a suitable vise.
  4. Use the CH-43631  ball joint remover (1) to remove and discard the wheel stud (2).
scientia non olet · About LEMON Manuals