LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Rear Suspension System) >> Repair Instructions >> Rear Wheel Bearing and Hub Replacement (FWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
  2. Remove Rear Wheel Speed Sensor@Knuckle Rear Wheel Speed Sensor Replacement
    3. Fig 1: Rear Brake Rotor
    GM4704954Courtesy of GENERAL MOTORS COMPANY
  3. Remove Rear Brake Rotor (1)Rear Brake Rotor Replacement
    4. Fig 2: Rear Wheel Bearing and Hub Assembly Bolt
    GM4709338Courtesy of GENERAL MOTORS COMPANY
  4. Remove Rear Wheel Bearing and Hub Assembly Bolt (1) and DISCARD the bolts.
    5. Fig 3: Rear Wheel Bearing And Hub Assembly
    GM4704965Courtesy of GENERAL MOTORS COMPANY
  5. Remove Rear Wheel Bearing and Hub Assembly (1)
scientia non olet · About LEMON Manuals