Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
- If equipped with F45, separate the rear shock absorber harness (1) from the rear suspension lower control arm.
- Separate the parking brake harness from the rear suspension lower control arm.
- Remove Rear Suspension Lower Trailing Link.Rear Suspension Lower Trailing Link Replacement
- Remove Rear Shock Absorber Nut (1).
- Remove Rear Shock Absorber Bolt (2).
DISCARD the bolt.
- Support the rear suspension lower control arm.
- Remove Rear Suspension Lower Control Arm Outer Nut (1).
- Remove Rear Suspension Lower Control Arm Outer Bolt (2).
DISCARD the bolt.
- Remove Rear Suspension Lower Control Arm Inner Nut (1).
- Remove Rear Suspension Lower Control Arm Adjust Cam (2).
- Lower the rear suspension lower control arm (1) to provide clearance for the rear coil spring.
- Remove Rear Coil Spring (1)
- Remove Rear Coil Spring Lower Insulator (2)
- Remove Rear Coil Spring Insulator (3)
- Remove Rear Suspension Lower Control Arm Inner Bolt (1).
- Remove Rear Suspension Lower Control Arm(1).