LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Rear Suspension System) >> Repair Instructions >> Adjust Link Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
    2. Fig 1: Rear Wheel Speed Sensor Harness
    GM4286546Courtesy of GENERAL MOTORS COMPANY
  2. Separate Rear Wheel Speed Sensor Harness (1) @Rear Suspension Adjust Link
    3. Fig 2: Rear Suspension Adjust Link Outer Bolt
    GM4286550Courtesy of GENERAL MOTORS COMPANY
  3. Remove the rear suspension adjust link outer bolt (1) and washer (2).

    DISCARD the bolt.

    4. Fig 3: Rear Suspension Adjust Link Nut
    GM4286552Courtesy of GENERAL MOTORS COMPANY
  4. Remove Rear Suspension Adjust Link Nut (1)
  5. Remove Rear Suspension Adjust Link Cam (2)
  6. Remove Rear Suspension Adjust Link Inner Bolt (4)
  7. Remove Rear Suspension Adjust Link Cam (3)
    8. Fig 4: Rear Suspension Adjust Link
    GM4286554Courtesy of GENERAL MOTORS COMPANY
  8. Remove Rear Suspension Adjust Link (1)
scientia non olet · About LEMON Manuals